Our
product range

back

Quality 1.4435

General Product Description

Material number 1.4435

Short name according to EN Z3CND18.14.3

AISI / UNS / Old designation AISI 316L , UNS S31603 , –

Applicable standards EN 10088-3, AD 2000 W 2, AD 2000 W 10, DIN EN 10272, ASTM A 182, ASTM A 479, ASTM A 276

Treatment solution annealed

Variations

QualityTreatmentShapeDimension (mm)
1.4435solution annealedRoundRound6 - 210
Your inquiry

Description

The material 1.4435 is a stainless stable austenitic Cr-Ni-Mo steel with low carbon content for high requirements on microstructural homogeneity. Type homogeneous and fully austenitic weldable. Resistant to intergranular corrosion up to 400°C. Applications: medical technology, chemical industry, shipbuilding, pharmaceutical industry, plant engineering, welded parts of increased chemical resistance in the pulp, rayon, textile and artificial silk industries.

Chemical composition (in %)

CCrNiMnSiPSMoN
Min - 17,0 12,5 - - - - 2,5 -
Max 0,03 18,0 13,0 2,0 1,0 0,045 0,015 3,0 0,10
ElementMinMax
C - 0,03
Cr 17,0 18,0
Ni 12,5 13,0
Mn - 2,0
Si - 1,0
P - 0,045
S - 0,015
Mo 2,5 3,0
N - 0,10

Mechanical properties (solution-annealed)

Tensile strength Rm 500–700 N/mm2

0.2% proof stress Rp0.2 ≥ 200 N/mm2

Elongation at break A5 ≥ 40 %

Notched impact energy (ISO-V) ≥ 100 J

Hardness 150–190 HB

Magnetizability No

Typical areas of application

Shipbuilding

Chemical and Pharmaceutical Industry

medical technology

Plant Engineering

General properties (solution-annealed)

Corrosion Resistance

Weldability

Forgeability

Tensionability

= Low
= Very Good

Note

All information in this data sheet has been compiled to the best of our knowledge and belief. It is for information purposes only and does not constitute a assured property or guarantee. For the suitability of the material in specific applications, we recommend carrying out appropriate inspections and tests. Any liability for damage or errors is excluded.

▲